|
parameter
olt fiberw-f410t
  
f410t is a new generation of small type gepon equipment. which is a telecom grade ftth broadband access equpment who provide for telecom operator. comparing with common epon products. it can supply higher bandwidth speed and connect more end-users, final to reduce operating investment cost effectively.
f410t is operator¡¯s last mile of ideal ftth solution with high integration, flexible application, high stableness, easy management, flexible to extend and buildup network, as well as providing qos function.
f410t comply with newest epon system standard base on ieee802.3ah. the fiber link up and down speed can reach to 1.25gb/s. each pon olt system can distribute into 32 remote onus to build up the fiber passive network by a max 32 way optical splitter with the advantage of big capacity of transmission, high security, flexibility of buildup network, economization the resource of fiber and to reduce related devices quantity.
f410t is a high performance device, through ftth/fttb/fttc fiber optical network to provide transmission service for such like family users, enterprise users etc where max bandwidth can reach to 1gbps. meanwhile, by natural advantage of pon system, operator can economic save cost on construction and using fiber cable, it can easily access to high speed of broadband data, ip telephone, and iptv.
this system combine with olt(optical line terminal), onu(optical network unit) and splitter, olt have 4 uplink port which connect ip network, meanwhile it have 4 epon downlink port, each port can support 1: 32 splitter through single fiber cable. so one olt device can support 128 onu end-user within transmission distance of 20 kilometers.
key features
1¡¢box syle structure, 1u height, simple&flexible install and maintenance
2¡¢complies with ieee802.3ah standard
3¡¢high splitter ratio, high fiber using
4¡¢allow exchange ability
5¡¢acl-access control list
6¡¢dba-dynamic bandwidth arranagement
7¡¢ip tos¡¢ieee802.1p
8¡¢qos support: ip tos, ieee802.1p
9¡¢onu auto-identify
10¡¢flexible qinq
11¡¢port mirror
12¡¢frame filtering, broadcast/ unknow unicast/ unknow multicast policing
13¡¢support mac address restriction
14¡¢aes-128 encrpytion tachniques
15¡¢support igmp snooping
16¡¢support tcp/ip, arp, igmp protocol
17¡¢powerful oam function
18¡¢support ieee802.1x
19¡¢gui interface, support band-in / band-out management
|
f410t |
|
hardware character |
|
frame |
|
dimension |
440mm (w) x 207mm (d) x 43mm (h) |
|
weight |
3kg |
|
power consumption(max) |
30w |
|
temperature£º
operating temperature£º0¡«50¡æ
storage temperature£º-30¡«60¡æ
relative humidity£º10¡«90% (no agulation) |
|
power supply |
|
power supply ac |
100-220v |
|
port character |
|
console port |
1 rs232c db-9 |
|
lan port£¨out of band management port£© |
2 rj45 10/100base-t |
|
uplink interface |
4 ge port £¬ sfp connector £¨both optical or electricity are ok £© |
|
fiber |
singlemode or multimode fiber |
|
connector |
lc connector |
|
pon port |
4 1000m port |
|
standard protocal |
ieee802.3ah |
|
fiber |
singlemode fiber |
|
connector |
sc connector |
|
max splitter ratio of each pon port |
32 |
|
speed ratio |
symmetry 1.25 gbps |
|
estimated optical loss |
28 db |
|
wavelength |
transmit: 1490 nm
receive: 1310 nm |
|
super character |
|
exchange function |
non-stop line speed switch ability
8kmac address table
support 512 multicast entry
support igmp snooping
support 4094 vlan£¨802.1q£©
£¨ieee802.ad£©up to 4 uplink ge port aggregate
support base on input output¡¯s port mirror |
|
qos |
8 cos alignment/onu user
ieee 802.1q&p
ipv4 tos pri
traffic shaping
dba dynamic bandwidth allocation
|
|
security |
acl
aes-128 encrpytion tachniques |
|
user authentication management |
ieee 802.1x authentication |
|
system management |
support band-in & band-out mangement
onu auto-identity
power management |
|
power supply ac |
100-240v |
| 
Service
Contact
josieHe501
:
